ProCurve 420 Manual do Utilizador

Release Notes: Version 2.1.7for the HP ProCurve Wireless Access Point 420These release notes include information on the following: Downloading access

4 Software ManagementNoteDownloading new software does not change the current access point configuration. The access point configuration is contain

5Software Management4. Download the update boot code file, bootrom306.bin.5. Download the update default software file, dflt-img.bin.6. After a su

6 Software Management7. Download the update v2.1.x software file, hp420-2170.bin.8. After a successful download, the prompt “Do you want to reset t

7Software ManagementNoteUpdating to version 2.1.x software from previous 2.0.x software versions requires a special procedure that is different fr

8 Software Management2. When the access point finishes downloading the file from the server, a number a messages are displayed as the software is i

9New FeaturesNew FeaturesNew Features in Release 2.1.7The table below summarizes the new features in this release. The new features are described

10 New FeaturesImproved Performance of DHCP Packet ForwardingSoftware release 2.1.7 improves the performance of DHCP response packet forwarding for

11New FeaturesNew Features in Release 2.1.5Software fixes only; no new features.New Features in Release 2.1.4Software fixes only; no new features.

12 New FeaturesNew Features in Release 2.1.2The table below summarizes the new features in this release. The new features are described in detail i

13New FeaturesPure 802.11g ModeSoftware release 2.1.2 supports a proprietary “pure 11g only” radio working mode for enhanced wireless performance.

ii © Copyright 2003, 2006 Hewlett-Packard Development Company, LP. The information contained herein is subject to change without notice.Publicatio

14 New FeaturesNew Features in Release 2.1.1Software fixes only; no new features.HP420(if-wireless-g)#showWireless Interface Common Information====

15New FeaturesNew Features in Release 2.1.0The table below lists the new features in release 2.1.0. The features are summarized in the sections fo

16 New FeaturesWPA2 SupportSoftware release 2.1.0 includes support for WPA2 security. This includes Advanced Encryption Standard (AES) for robust d

17New FeaturesSecure ShellThe release 2.1.0 software supports a Secure Shell (SSH) version 2.0 server. SSH acts as a secure replacement for Telnet

18 ClarificationsClarificationsMaximum Number of Associated ClientsThe maximum number of clients that can associate simultaneously to all of the ac

19Software FixesSoftware FixesRelease 2.1.7Version 2.1.6 was never released.Problems Resolved in Release 2.1.7 CLI/Web — Management VLAN setting

20 Software FixesRelease 2.1.4Problems Resolved in Release 2.1.4 CLI/Web — RADIUS Authentication Server IP addresses cannot be changed back to the

21Software Fixes SNMP — Using SNMP, the MAC filter permission state (deny/allow) is not consistent with the Web and CLI interface. (18-01155) Au

22 Software Fixes CLI/Web — The Web interface accepts user names of incorrrect length without an error message, but the values are not saved. (18-

23Software Fixes SNTP — The access point does not successfully update the system time by broadcasts from the SNTP server. (18-01073) SNTP — The

iiiContentsSoftware ManagementDownloading Access Point Software and Documentation from the Web. . . . . . . . . . . . . . . . . . . . . . . 1Download

24 Software Fixes CLI/Web — In the CLI the Local MAC authentication list shows the status as “AVTIVE” rather than “ACTIVE.” (18-00820) System — C

25Software FixesRelease 2.0.38Problems Resolved in Release 2.0.38 Management — The AP 420 with 2.0.38 software can now be managed by AirWave Mana

26 Software Fixes CLI/Web — Using the CLI interface, invalid IP addresses and host name characters (for example, @#%^&) can entered for a logg

27Software Fixes SNMP — Using SNMP management tools, RADIUS server IP addresses (hpdot11AuthenticationServer of hpdot11AuthenticationTable) can b

28 Software Fixes System Log — The System Log does not show an entry when the 802.11g radio channel is changed to “auto.” (18-00209, 18-00277)Rele

29Known Software Issues and LimitationsKnown Software Issues and LimitationsThe following sections contain limitations and known software problems

30 Known Software Issues and Limitations System — When a software upgrade is interrupted (such as due to a loss of power), the access point often

© Copyright 2003, 2006 Hewlett-Packard Development Company, LP. The information contained herein is subject to change without notice.December 2006Pa

ivNew Features in Release 2.1.0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

vKnown Software Issues and LimitationsLimitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

vi—This page is intentionally unused—

1Software ManagementSoftware ManagementDownloading Access Point Software and Documentation from the WebYou can download software version 2.1.7 and

2 Software ManagementAfter you acquire the new software file, you can use one of the following methods for downloading the software to the access p

3Software ManagementDue to the increased size of the v2.1.x runtime software file, the access point requires an update of both the boot code (boot