ProCurve 420 Informações Técnicas descarregar pdf (Página 115)

General System Configuration

Enabling System Logging

Web: Setting Logging Parameters

The System Servers window on the Administration tab enables system logs and

Syslog server details to be configured for the access point.

The web interface enables you to modify these parameters:

■ System Log Setup: Enables the logging of error messages.

■ Server (1 to 4): Enables the sending of log messages to Syslog server

hosts. Up to four Syslog servers are supported on the access point.

■ Name/IP: The IP address or name of a Syslog server.

■ UDP Port: The UDP port used by a Syslog server.

■ Logging Console: Enables the logging of error messages to the console.

■ Logging Level: Sets the minimum severity level for event logging

No t e To view log messages generated by the access point, click the [Event Log] button

on the Status

tab. See “Event Log” on page 4-23.

To Enable Logging:

1. Select the Administration tab.

2. Click the [

System Servers] button.

3. For System Log Setup, select Enable.

4. For Logging Level, select the minimum severity level to be logged.

5. (Optional) If you want to send log messages to a Syslog server, perform

these steps:

a. Set one of the Server parameters to Enable.

b. In the Name/IP field, type the IP address or name of the Syslog server.

c. Set the UDP port used by the Syslog server.

6. (Optional) If you want to send log messages to the console, set Logging

Console to Enable.

7. Click the

[Apply Changes] button.

5-41

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 362 363

Sem comentários

ProCurve 420 Informações Técnicas Página 115