ProCurve 420 Informações Técnicas descarregar pdf (Página 189)

Wireless Security Configuration

Using the Security Wizard

Using the CLI to Configure Static WEP Shared Keys. The following

example shows how to configure an SSID interface to use static WEP keys for

authentication and encryption. The security-suite shared-key command must

be used first to enable 802.11 shared-key authentication and enable encryp-

tion. Other WEP key parameters can then be configured.

HP420(config)#interface wireless g

Enter Wireless configuration commands, one per line.

HP420(if-wireless-g)#ssid index 1

HP420(if-wireless-g-ssid-1)#security-suite shared-key

HP420(if-wireless-g-ssid-1)#transmit-key-wep 2 128 ascii

1234512345abc

HP420(if-wireless-g-ssid-1)#

The following example shows how to configure an SSID interface to use static

WEP keys for encryption only.

HP420(if-wireless-g-ssid-1)#security-suite 2

HP420(if-wireless-g-ssid-1)#transmit-key-wep 2 128 ascii

1234512345abc

HP420(if-wireless-g-ssid-1)#

Or, you can configure static WEP encryption keys without using the security-

suite command wizard option.

HP420(if-wireless-g-ssid-1)#security-suite open-system wpa-

disabled 802.1x-disabled

HP420(if-wireless-g-ssid-1)#transmit-key-wep 2 128 ascii

1234512345abc

HP420(if-wireless-g-ssid-1)#

Using the CLI to Configure WPA-PSK Mode. To configure an SSID inter-

face to operate in WPA-PSK mode, use the security-suite command wizard

option 3 for AES encryption, option 4 for TKIP encryption, or option 8 for

WPA2 auto-negotiation. Then set the key value using the wpa-preshared-key

command.

7-21

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 362 363

Sem comentários

ProCurve 420 Informações Técnicas Página 189