ProCurve 2510G Series Informações Técnicas descarregar pdf (Página 113)

100

101

6-19

Switch Memory and Configuration

Using Primary and Secondary Flash Image Options

For example, to reboot the switch from secondary flash when there are no

pending configuration changes in the running-config file:

Figure 6-14. Example of Boot Command with Primary/Secondary Flash Option

In the above example, typing either a

y or n at the second prompt initiates the

reboot operation. Also, if there are no pending configuration changes in the

running-config file, then the reboot commences without the pause to display

Boot from secondary flash.

Booting from the Current Software Version

The reload command reboots the switch from the flash image on which the

switch is currently running, and saves to the startup-config file any configura-

tion changes currently in the running-config file. Because reload bypasses

some subsystem self-tests, the switch reboots faster than if you use either of

the boot command options.

Syntax: reload

For example, if you change the number of VLANs the switch supports, you

must reboot the switch in order to implement the change. Reload automati-

cally saves your configuration changes and reboots the switch from the same

software image you have been using:

Figure 6-15.Using Reload with Pending Configuration Changes

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 411 412

Comentários a estes Manuais

Sem comentários

ProCurve 2510G Series Informações Técnicas Página 113

Comentários a estes Manuais