ProCurve 2610-PWR Informações Técnicas descarregar pdf (Página 207)

10-15

Port Status and Basic Configuration

Viewing Port Status and Configuring Port Parameters

The Auto-MDIX features apply only to copper port switches using twisted-pair

copper Ethernet cables.

For example, show interfaces config displays the following data when port 1 is

configured for auto-mdix, port 2 is configured for mdi, and port 3 is configured

for mdix.

Auto-MDI-X

(The Default)

Either Crossover or Straight-Through Cable

Syntax: interface < port-list > mdix-mode < automdix | mdi | mdix >

automdix is the automatic, default setting. This configures the

port for automatic detection of the cable (either straight-through

or crossover).

mdi is the manual mode setting that configures the port for

connecting to either a PC or other MDI device with a crossover

cable, or to a switch, hub, or other MDI-X device with a straight-

through cable.

mdix is the manual mode setting that configures the port for

connecting to either a switch, hub, or other MDI-X device with

a crossover cable, or to a PC or other MDI device with a straight-

through cable.

Syntax: show interfaces config

Lists the current per-port Auto/MDI/MDI-X configuration.

Syntax: show interfaces brief

Where a port is linked to another device, this command lists

the MDI mode the port is currently using. In the case of ports

configured for Auto (auto-mdix), the MDI mode appears as

either MDI or MDIX, depending upon which option the port has

negotiated with the device on the other end of the link. In the

case of ports configured for MDI or MDIX, the mode listed in

this display matches the configured setting. If the link to

another device was up, but has gone down, this command

shows the last operating MDI mode the port was using. If a

port on a given switch has not detected a link to another device

since the last reboot, this command lists the MDI mode to

which the port is currently configured.

MDI/MDI-X Device Type

Setting PC or Other MDI Device Type Switch, Hub, or Other MDI-X Device

1 2 ... 202 203 204 205 206 207 208 209 210 211 212 ... 468 469

Sem comentários

ProCurve 2610-PWR Informações Técnicas Página 207