ProCurve 2610-PWR Informações Técnicas descarregar pdf (Página 361)

100

101

A-21

File Transfers

Copying Diagnostic Data to a Remote Host, PC, or Unix Workstation

Copying Diagnostic Data to a Remote

Host, PC, or Unix Workstation

You can use the CLI to copy the following types of switch data to a text file in

a management device:

■ Command Output: Sends the output of a switch CLI command as a file on

the destination device.

■ Event Log: Copies the switch’s Event Log into a file on the destination

device.

■ Crash Data: OS-specific data useful for determining the reason for a

system crash.

■ Crash Log: Processor-Specific operating data useful for determining the

reason for a system crash.

Copying Command Output to a Destination Device

This command directs the displayed output of a CLI command to a file in a

destination device.

Syntax: copy command-output <"cli-command"> tftp < ip-address >

< filepath-filename >

copy command-output < "cli-command" > xmodem

For example, to use Xmodem to copy the output of show config to a serially

connected PC:

Figure A-8. Example of Sending Command Output to a File on an Attached PC

Note that the command you specify must be enclosed in double-quote marks.

At this point, press

[Enter] and start the

Xmodem command

sequence in your

terminal emulator.

Indicates the operation is finished.

1 2 ... 356 357 358 359 360 361 362 363 364 365 366 ... 468 469

Comentários a estes Manuais

Sem comentários

ProCurve 2610-PWR Informações Técnicas Página 361

Comentários a estes Manuais

Manuais e produtos relacionados com Software ProCurve 2610-PWR