ProCurve 2610-PWR Informações Técnicas Página 314

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 313
13-32
Configuring for Network Management Applications
LLDP (Link-Layer Discovery Protocol)
Remote Management Address. The switch always includes an IP address
in its LLDP advertisements. This can be either an address selected by a default
process, or an address configured for inclusion in advertisements. Refer to “IP
Address Advertisements” on page 13-34.
Debug Logging. You can enable LLDP debug logging to a configured debug
destination (Syslog server and/or a terminal device) by executing the debug
lldp command. (For more on Debug and Syslog, see “Debug and Syslog
Operation” on page C-25.) Note that the switch’s Event Log does not record
usual LLDP update messages.
Remote Management
Address
Type
4, 6
N/A Always Enabled Shows the network address type.
Address
4
Default or
Configured
Uses a default address selection method unless an optional address is
configured. See “Remote Management Address”, below.
System Name
6
Enable/Disable Enabled Uses the switch’s assigned name.
System Description
6
Enable/Disable Enabled Includes switch model name and running software version,
and ROM version.
Port Description
6
Enable/Disable Enabled Uses the physical port identifier.
System capabilities
supported
5, 6
Enable/Disable Enabled Identifies the switch’s primary capabilities (bridge, router).
System capabilities
enabled
5, 6
Enable/Disable Enabled Identifies the primary switch functions that are enabled,
such as routing.
1
The Packet Time-to-Live value is not viewable, but is included in LLDP data packets. (Refer to “Changing the Time-to-
Live for Transmitted Advertisements” on page 13-38.)
2
Subelement of the Chassis ID TLV.
3
Subelement of the Port ID TLV.
4
Subelement of the Remote-Management-Address TLV.
5
Subelement of the System Capability TLV.
6
Populated with data captured internally by the switch. For more on these data types, refer to the IEEE 802.1AB-2005
Standard.
Data Type Configuration
Options
Default Description
Vista de página 313
1 2 ... 309 310 311 312 313 314 315 316 317 318 319 ... 468 469

Comentários a estes Manuais

Sem comentários